Incorporating permanent fall protection systems into the overall construction plan benefits workers during the initial construction phase and while conducting building maintenance. Photos: MSA, The Safety Company
The majority of new and existing buildings require safe access to the roof area for ongoing building maintenance, as well as to service equipment such as telecommunications masts, skylights, air conditioning units, elevator machinery, and PV panels.
As such, failing to plan is planning to fail—especially when it comes to incorporating fall protection systems into the design, construction, and maintenance of a facility.
Without question, construction is a high-hazard industry and worker safety is, of course, paramount. The U.S. Department of Labor’s Occupational Safety and Health Administration (OSHA) helps ensure workplace safety standards by requiring fall protection equipment, fall arrest systems, and fall protection training for workers at height in the construction industry.
And yet there are pervasive numbers of architects, builders, general contractors, and building owners who are simply unaware that incorporating fall protection systems into their overall construction plan is not only possible, but highly desirable—not just to the benefit of the construction worker or roofer, but also to the overall building aesthetics, as well as ease and safety of ongoing building maintenance.
When it comes to commercial and infrastructure construction, the most important safety concerns are prevention of fall- and falling object-related accidents. In fact, 100 percent of fall-related accidents are preventable; yet, statistics show that falls are the leading cause of construction-related deaths.
That’s why OSHA holds fall-prevention planning in such high regard, as evidenced by its Fall Prevention Campaign, which urges construction employers to “plan projects to ensure that the job is done safely,” including “how the job will be done, what tasks will be involved, and what safety equipment may be needed to complete each task.”
Planning for, and incorporating, fall protection systems into the building design before construction offers these four key benefits:
It allows for appropriate and proper safety equipment outfitting and training of the worker at height at all phases of construction and maintenance, giving building owners and facility managers peace of mind that maintenance staff have the safety systems they need to carry out their duties.
It maintains the integrity of the original building design, giving architects more aesthetic control over the building.
It saves the cost, confusion, and chaos of retrofitting buildings with OSHA-required at-height fall protection systems, allowing for the planning and implementation of high-quality, versatile systems.
It protects roof structures from potential damage caused by post-construction add-on systems.
From trips to slips, and from falls to fatalities, the most often cited OSHA fall-related violations involve skylights, steep-slope roofs, and unprotected edges.
To reduce risk, it is imperative to plan and implement a comprehensive, engineered fall protection system specific to the building design. Components may include such fall-protection products as:
Designated walkway systems
Energy-absorbing force posts
Engineered horizontal lifelines
Fall arrest systems and fall limiters
Fixed ladder fall protection
Overhead protection systems
Safety net systems
Vertical lifeline systems
Training everyone on the proper use of safety systems is a crucial part of the process. Remember, workers at height are always at risk of falling, and it’s your job to protect them. Early-stage planning helps make sure that the systems used are perfectly integrated into the building to not only protect the worker but also to seamlessly fit with the building design.
Here are some best practice recommendations when planning an engineered fall protection system:
Start early. Your in-house specification team should work with your solutions provider to assess your building’s unique installation requirements.
Design to requirements. Ask your solutions provider to design a system that meets both pre- and post-construction requirements. Stipulate that your provider help with CAD concepts, working drawings, and plans, as necessary.
Confirm the approach. Request a “checking service” to make sure that the recommended approach is the absolute best available for your particular application.
Ensure versatility. Since access requirements vary by build or retrofit, make sure your solutions provider has the ability to adapt to a wide range of roofing shapes, materials, and contours.
Confirm safe access post-construction. While construction-related safety is important, it’s also critical to ensure total safety for workers with a system that allows safe access to the finished roof.
Consider building aesthetics. Ask your safety solutions provider to consider form as well as function; namely the appearance of the building and surrounding areas. For example, components of safety systems, such as bodies and base plates of our posts, can be powder-coated to soften their appearance against the roofing material.
When specifying fall protection systems, make sure you consider all aspects of a well-engineered system, from quality, versatility and lifespan, to aesthetic appeal, teamwork, and innovation.
About the Author: Anne Osbourn is an Industrial Marketing Manager at MSA, The Safety Company, http://us.msasafety.com.
The post Why Planning Ahead for Post-Roofing Fall Protection Matters appeared first on Roofing.